Publicidad
Idiomas disponibles
Idiomas disponibles
Blade Sharpening
1. This operation should be undertaken if the cutting blade becomes dul. It
should be noted that the blade is made fromhardened material and under
normal use should only need sharpening once a year.
2. Unplug the unit.
3. Ensure that the slice thickness knob is in the 'o' position.
4. CAREFULLY clean the part of the blade to be sharpened.
5, Unlock the sharpening device using the safety locking screw. Lift up the
sharpening assembly and rotate it 180° sothat both grinding wheels are in
the correct position. Lower the sharpening device and lock in position.
6. Plug in the machine and switch on.
7. Using the button at the rear of the sharpening unit, push the stone
against the rotating blade for approximately 30seconds
8. After sharpening, it is important to remove the grinding wheel from the
blade by leting go of the push button on thefront of the sharpening device.
Run the slicer for 2-3 seconds after letting go of this button.
9. Return the sharpening device to its original position by unlocking the
safety screw and rotating by 180°
- 15 -
Publicidad
