Descargar Imprimir esta página

VEVOR 1A-CS110 Manual Del Usuario página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 109
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the
machine ON. Be sure to understand all the information contained in this
manual. If you have questions, contact Paladin Equipment via the
"Contact Us" form at www.paladinequipment.com
Danger
• An electric cable or wire with damaged jacket or bad insulation might
cause electrical shocks or electrical leak. Before use, check the conditions
of all wires and cables. Do not use the machine if cables or wires are
damaged.
Advice
• Be sure to thoroughly understand all the functions, operating procedures
and information contained in this manual before operating the machine.
• Before using any switches, buttons, levers, etc., be sure it is the correct
one for the action you wish to perform. When in doubt, consult this manual.
Precautions
• The electric cable has to be compatible with the power required by the
machine.
• Cables touching the floor or near the machine need to be protected
against short circuits.
Routine Inspection
Advice
• When checking the tension of the belts or chains, DO NOT insert your
fingers between the belts and the pulleys and nor between the chain and
the gears.
Precautions
• Check the motor and sliding or turning parts of the machine in case of
abnormal noises.
• Check the tension of the belts and chains. If either shows signs of
wearing, do not use the machine. Have the part replaced professionally
- 18 -

Publicidad

loading