Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the inner glass plate
The inner glass plate in the oven door can be removed for
cleaning.
Unscrew both plastic parts at the upper side corners of the
•
oven door and put them aside.
Remove the glass plate and clean it.
•
Insert the glass plate in the reverse order. Secure the glass
•
plate again with the two plastic parts.
15.2 Replacing the lamp
Lamp data for oven light (suitable for temperatures up to 300 °C):
Voltage: 230V
Power: 25W
Heat resistance: T300
Fitting: G9 (plug-in lamp)
Follow these steps to replace the oven light:
1. Switch off the fuse.
2. Let the oven cool down.
3. Open the oven door and remove the protective glass.
4. Turn defective lamp anti-clockwise and release.
5. Screw in the new lamp.
6. Fit the protective glass.
7. Switch on the fuse.
8. Turn the oven function selector to the "Light" level and
check whether the lamp works.
9. In event of a fault, please contact After Sales Service.
Figure 14 Glass plate
Abbildung14 Interior lighting
Page | 63
EN
Publicidad
