GYS 067158 Manual De Uso página 27

Operating manual
Inspections and maintenance work must be carried out by authorised personnel at the maintenance intervals specified
in this manual. In order to guarantee a long service life and effective performance of the crane, the following informa-
tion must be taken into account.
• Only genuine spare parts may be used «Spare parts»;
• The recommended maintenance intervals in the «Maintenance Table» must be observed and documented;
• For maintenance work that is not shown or indicated in the operating instructions, contact your distributor and/or the
manufacturer.
The «Regular inspection» table lists all the points to be monitored and checked during the maintenance operations,
commissioning, and after repair or reassembly.
Visually inspect your crane before each use. Do not use it if you find any damage, significant
wear, or hydraulic fluid leakage.
Clean the machine at least once a week to remove any dust and dirt that could affect the long-
term functionality of the product. Use self-cleaning cloths. Do not use water, flammable, or
corrosive liquids.
MAINTENANCE BOOKLET:
Use the «Regular inspection» and «Maintenance table» forms to document the routine and annual assessments.
Make a record of the condition of the lift every year and attach it to the operating instructions.
The regular safety inspection must be carried out by an authorised person in the company or from an appropriate or-
ganization. It is recommended to perform maintenance at the same time and refer to this manual for troubleshooting.
It is strictly prohibited to use any spare parts other than the original ones certified by the manufacturer.
MAINTENANCE TABLE
Maintenance intervals
Monthly
Annual
Every 5 years of service
MAINTENANCE
Dust removal can be done with a compressed air blow gun before cleaning. Ensure you clean the Multitool Truck with
a product suitable for painted steel surfaces. Follow the product's cleaning instructions. Wipe the Multitool Truck with a
cloth after cleaning. Never use a high-pressure washer, as this will damage the paint.
WARRANTY
The warranty covers any defects or manufacturing faults for two years, from the date of purchase (parts and labour).
The warranty excludes incidents due to misuse, dropping, dismantling, or any other damage due to transport. The
warranty does not cover normal wear and tear of parts if maintenance is not kept up to date. Only spare parts from the
manufacturer may be used for repairs.
The load limit specifications are indicated on the crane. The user must not remove, smear, or deface this label. The
warranty will be automatically terminated if this label is falsified. Contact the retailer or manufacturer to get new ones if
needed.
Translation of the original
instructions
INSPECTION AND MAINTENANCE
Task
«Regular safety check»
If used frequently, change the oil.
MULTITOOL TRUCK
Notes
To be carried out by an authorised
person and to be completed and
signed.
Replace the oil if you notice a
reduction in the climbing speed.
27