Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Then, screw on the locking ring by turning it clockwise until the blades click into position.
-
Screw the glass jug onto the motor unit.
-
Fitting the jug to the blender body Fig. 3
Place the lid on the jug.
-
Place the jug on the blender body and turn it slightly to lock into position.
-
Disassembly of the blades Fig. 4
Unscrew the locking ring by turning it anticlockwise.
-
Remove the locking ring, blades, and silicone gasket.
-
Unscrew the jug holder by turning it anticlockwise.
-
4. OPERATION
1. Cut the fruits or vegetables into pieces, put them in the jug with a little water and then put
the lid on top.
2. Place the glass jug on the motor unit, and make sure that it is securely fitted.
3. Plug in the blender and press the speed touch icons to the desired position: "1" for low
speed, "5" for high speed and "P" for turbo mode.
4. Press the speed touch icon to the "0" position, unplug the blender and wait for the blades
to come to a complete stop.
*Turbo mode
-
Designed for crushing ice cubes. The blender will operate in short pulses thanks to the
power of the blades.
Press the speed touch icon to position "P" and hold it for 3 seconds. Repeat the action
-
several times until the desired result is achieved.
*Safety system
The blender has a safety system. It will automatically stop working if the motor overheats. If
the blender stops, switch off and unplug the appliance from the socket and let it cool down for
at least 20 minutes.
Tips:
Pre-cut the food into 2 or 3 cm pieces.
-
Do not exceed the MAX mark.
-
Place your hand on the lid to hold the blender when it is in operation.
-
Do not crush nuts in their shell.
-
Do not use the appliance for longer than 1 minute.
-
Allow the appliance to cool down to room temperature before switching it on again.
-
36
POWER BLACK TITANIUM 2000MAX MIDNIGHT/ POWER BLACK TITANIUM 2300MAX MIDNIGHT
Publicidad
