Sleep.8 ErgoBed 3170 Manual Del Usuario página 17

Remote Control Pairing
Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No
further action is required. In the event that the remote is not paired with the base, follow
the steps below.
STEP 1
Locate the Power Down Box and press the button TWICE. A light on the Power Down Box
will illuminate.
STEP 2
Remove the back cover of the remote, press and hold down the PAIR button. The PAIR
button will illuminate blue and start flashing. When the PAIR button stops flashing, the
illuminated light on the Power Down Box will go out. Release the PAIR button. The remote
is now paired to the adjustable base.
Power Down
Button
PAIR
Button
15