Descargar Imprimir esta página

Goodyear GY3202PS Manual De Instrucciones página 27

Tijera de poda eléctrica
Ocultar thumbs Ver también para GY3202PS:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English • Owner´s manual
fluid. Flush with water in case of contact. If battery fluid should get into your eyes, seek
medical advice additionally. Leaking battery fluid may lead to irritations of the skin or burns!
ATTENTION!
Have the power tool serviced by qualified technical personnel only; repairs should be carried
out using exclusively original spare parts. This will ensure the safe operation of the power tool.
Electrical safety
1. The power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter
plugs with grounded power tools. Unmodified plugs and corresponding outlets will reduce the risk
of electric shock.
2. Avoid body contact with grounded or grounded surfaces, such as pipes, radiators, stoves and
refrigerators. There is an increased risk of electric shock if your body is grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
4. Do not abuse the cable. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat, oil, sharp edges or moving parts. Damaged or entangled cables increase the risk of
electric shock.
5. When operating an outdoor power tool, use an extension cord suitable for outdoor use. The use of a
cable suitable for outdoor use reduces the risk of electric shock.
6. If you cannot avoid operating a power tool in a humid place, use a supply protected by the residual
current device (RCD). The use of an RCD reduces the risk of electric shock.
Pruning shear special safety instruction
1. Keep anybody away at least 1.5m from the blade, do not move the tool while in use.
2. Keep any part of your body away from the blade at least 15cm. Careful use of the tool can prevent
tool can prevent injury.
3. Keep the tool well adjusted and sharp. Do not leave the blade open when not working or in storage.
Protect it to reduce the risk of injury.
WARNING:
DO NOT allow comfort or familiarity with the product (obtained with repeated use) to avoid strict
compliance with the safety standards of the product in question. Misuse or breach of the safety rules
set forth in this instruction manual can cause serious personal injury.
Special safety instruction for battery tool
1. Make sure the battery switch is in "OFF" position before insert battery. The equipment can be
damaged if inserting the battery at switch on.
2. Charger design for use only indoor. Charging operations have to be performed indoor.
3. Disconnect power before to clean the charger to avoid damage and risk of electrical shock.
4. Don't expose battery in strong light. Don't put battery on hot surface. It can cause battery explosion.
5. Fully cold battery before charging.
6. Don't disassemble the battery, don't damage battery, in order to avoid injury.
Use charger correctly
1. Use the battery charger only with rechargeable cells. Otherwise, it may cause fires and explosions.
Use only the original battery charger.
2. Always check the condition of the charger, cable and plug before each use. If damaged, always
27

Publicidad

loading

Este manual también es adecuado para:

Gy2802ps