Goodyear GY3202PS Manual De Instrucciones página 33

English • Owner´s manual
1. Remove the screws with a screw-
driver and open the cover.
4. Disassemble the pin and remove
the movable blade.
7. Replace the blade.
The fixed blade and the movable blade can be replaced independently. Once replaced, do not be afraid
if the angle between blades is too small. Once connected, the normal opening size will be restored
automatically.
7. CHARGING THE BATTERY
ATTENTION!
Do not expose the battery to extreme temperatures or strike it with or against any object. Leakage or
loss of the internal electrolyte as well as fire or explosion can cause serious injury.
Disconnect the battery from tool before charging.
1. Always make sure the battery is dry and clean before charging.
2. Make sure the battery is fully charged before first time using.
3. The battery is not fully charged when purchased, recharge it for 1.5-2 h (GY2802PS) and 2-2.5 h
(GY3202PS) before using it for the first time.
2. Remove the blade nut retaining
buckle bolts (this step is essential).
5. Removable fixed blade.
8. Insert the nut.
3. Remove the blade nut.
6. When replacing the blades, it
is necessary to add lubricating oil
between the blades.
9. Insert the locking nut TAB
33