Lubrication; Storage - Hoover Z 700 Manual De Uso

Storing your cleaner
Disconnect cleaner from electrical outlet.
Cord storage
Open the tool/cord storage compartment. Wrap the cord in a clockwise
39
direction around the two cord hooks, ending with the plug end at the cen-
ter of the storage cavity. The plug should not be against the tool so it interferes
with closing the door.
Fold cleaner to storage position
The cleaner can be folded to the storage, or canister position for more
40
compact storage. To fold the Z™ cleaner for storage, grasp and hold
the pull ring (A) as you are pushing down and slightly backward on either
the telescoping handle/wand or handle grip. It will click when it is locked in
place.

Lubrication

The cleaner is equipped with bearings that contain sufficient lubrication for the life of the cleaner. The addition of lubricant could
cause damage. Therefore, do not add lubricant to any bearings.
A
(Cont'd)
17