Carton Contents; Unpacking - Hoover Z 700 Manual De Uso

A
Unpacking your cleaner
Position handle
A
The telescoping handle/
1
wand (A) with attached
flexible hose needs to be posi-
tioned and locked in place.
Slide the locking latch (B)
toward the control panel to
allow the wand to be inserted
into the opening. Push the
wand all the way down into
the opening, aligning the but-
ton projection on the wand
with the slot.
04
Lock handle in place
B
2
Slide the locking latch (B)
away from the control panel
(C) to secure the telescoping handle/
wand.
To remove the wand for tool use,
slide the locking latch toward the
control panel and remove the wand.

Carton contents

A. Cleaner
B. Soft Touch™ Floor Brush
C. Extension Wand
B
Unfold cleaner
C
To unfold the Z™ cleaner for
3
use in the upright position,
grasp and hold the pull ring (D) as
you are pulling up and slightly for-
ward on either the carry handle or
telescoping handle/wand. It will
click when locked in place.
C
D