Publicidad
Idiomas disponibles
Idiomas disponibles
1.
To do a spot test, follow steps 1-5 and 7-9 in the next
section.
2.
If you experience little or no discomfort during and after
use at the lowest energy setting, increase the energy level
by one indicator light the next time you use the device,
and so on for each subsequent hair removal session.
3.
Repeat the spot test for each area you wish to treat.
9.3 Treatment steps
1.
Remove all jewelry before use.
2.
Before treatment, the skin should be shaved, clean, dry and
free of any powders, antiperspirants or deodorants. Do not
wax, pluck or tweeze the hair out.
Never use flammable liquids such as alcohol (including
Z
perfumes, sanitizers, or other applications containing
alcohol), or acetone to clean the skin before use.
3.
Be sure to cover up tattoos, moles, warts, large freckles,
black spots or other marks on the skin that should not be
treated. Use a material that does not absorb the light such
as a white cloth or white medical tape.
4.
Press the control button (#5). The device will turn on, the
level 1 energy level indicator light (#4) will be on, and a fan
sound will start.
5.
Approximately 1 second after pressing the control button
(#5), the ready/skin tone warning indicator light (green)
(#6) will turn on. The device is now ready for you to trigger
the first pulse at the lowest energy level. Always start at
energy level 1 for your first treatment.
6.
Select the energy level you are most comfortable with.
17
EN
Publicidad
