Silk’n Infinity Fast Manual Del Usuario página 21

11. Keep Pulsing or Gliding until you have covered the target
area.
Try to avoid gaps or overlaps. Overlaps increase the
Z
likelihood of adverse affects.
The device will only emit repeated pulses when it is in firm
Z
contact with your skin, and you keep moving it across your
skin.
12. When you have completed your treatment, long press the
control button (#5), to switch off the device. Remember
the last energy setting you used because the device always
starts up at energy level 1.
13. Disconnect the adapter (#9) from the electricity supply,
then clean the device and store safely (see section 10.
Cleaning and maintenance).
14. After your treatment session we recommend you apply a
body lotion to the treated area to help your skin recover
from the treatment faster.
10. Cleaning and maintenance
U
Disconnect the device from the electricity supply.
U
To clean the device including the treatment surface (#2),
use a clean, dry cloth and 70% alcohol. Never use acetone
or other abrasive fluids, because they will damage your
device. Then use a wipe to dry the device.
U
After cleaning, we recommend you store the device in its
original box and keep it away from water.
19
EN