Stihl BR 350 Manual De Instrucciones página 13

BR 430 Blower Tube
Mounting the control handle
1
2
Pull the two halves of the clamp
N
apart.
Push the control handle (1) onto the
N
blower tube (2).
1
2
3
Line up the control handle (1) with
N
the tube's seam – as shown.
Secure the control handle (1) with
N
the screw (3) so that it can still be
moved on the blower tube (2).
BR 350, BR 430
Mounting the blower tubes
2
3
Depending on your size and reach:
N
Push blower tube (1) up to the
appropriate mark on the blower
tube (2).
Rotate the blower tube (1) in the
N
direction of the arrow and engage it
in the appropriate slot (3).
Mounting the hose clamps and
pleated hose
1
3
2
Push the hose clamp (1) (with
N
retainer for throttle cable) onto the
elbow (3) – the positioning marks
must face to the left.
Push the pleated hose (2) over the
N
elbow (3).
3
1
Push the hose clamp (1) onto the
N
pleated hose (2).
Line up the positioning marks on the
N
hose clamp (1) and elbow (3) – the
screw recess facing down.
Secure the hose clamp (1) with the
N
screw (4).
2
Push the hose clamp (5) (without
N
retainer for throttle cable) onto the
elbow (6) – the positioning marks
must face to the right.
Push the blower tube (6) into the
N
pleated hose (2).
English
1
2
4
5
6
11