Harken INTCLHRW500KIT Manual De Instrucciones página 33

4. MARKING
The CE plate is located on the skirt of the Winch (see figure 4.1).
1. Name of the manufacturer.
2. Product name and model.
3. Manufacturer's identification data.
4. Indication of Maximum Working Load (MWL) of the Winch, with specific indications for lifting/
lowering loads.
5. Serial number in the format: SXXXXXYYXXXXXXX where YY are the last two numbers of the
production year of the machine (ex. 23= year 2023).
6. Safety instruction on the interval of min/max winding layers of rope to be used; pictogram
indicating the winding direction and the route of the rope on the Winch.
7. List of applicable regulations.
8. CE mark.
9. Use only textile ropes. MBS 3500 kg: min. breaking load 3500 kg.
10. Pictogram indicating the prohibition of lifting persons.
11. Pictogram of the instruction to read the manual before using the Winch.
12. Production year.
Pictogram showing the lifting/lowering of loads.
Pictogram showing the min/max diameter of the textile rope as per Machinery
Directive 2006/42/EC for lifting/lowering of loads.
Pictogram showing the winding direction of the rope.
NOTE!
Do not remove the labels affixed on the machine. The labels must be kept well fixed, intact and in
excellent reading conditions.
5. CERTIFICATIONS
The Top-Crank LokHead Rigging Winch 500 (INTCLHRW500 and INTCLHRW500KIT) is certified
pursuant to Directive 2006/42/EC. The harmonised standard EN 13157:2009 has been used as
reference for machine design.
33 22/06/2023