Publicidad
Idiomas disponibles
Idiomas disponibles
Fill the water tank with water and heat up the iron, and then iron over a piece of damp cloth for
several minutes for the purpose of removing any residue on the soleplate.
Warning: Some parts of the steam iron have been slightly greased and as a result, the iron may
slightly smoke when switched on for the first time. After a short time, this will cease.
It is normal that strange odor comes out from the unit for the first use. This will cease after a
short while.
When the appliance is switched on, the steam generator may produce a pumping sound. This
is completely normal; this sound indicates that the water is being pumped into the steam
generator.
During the soleplate's heating process, some steam may come out from the soleplate for
about 3 seconds.
3. OPERATION
Water inlet cover
Open the water inlet cover and fill the water tank with water through the filling opening. Make
sure water does not exceed the MAX. mark on the water tank.
Power switch
For switching the device on, it must be plugged in. Press the power switch button, and the
power indicator light will turn on. The low-steam rate is the default mode, so its indicator light
will turn on. Press the power switch button for about two seconds to turn the device off.
Steam-power level button
Use the steam-power level button to select the desired steam-power level: Medium or high.
Whichever is selected, its corresponding indicator light will flash, and it will flash after having
finished preheating.
Temperature knob
Turn the temperature knob to set the desired ironing temperature based on the garment to
be ironed. To activate the steam function, select the temperature range at which steam is
produced, otherwise steam spray will not be emitted efficiently.
Temperature indicator
When the iron is heating up, the temperature light indicator will turn on. Once the iron has
reached the selected temperature, it will turn off. The temperature indicator will switch on and
off as the iron maintains the selected temperature during ironing.
Lock button
Place the steam station on the heatproof stand of the unit base, then push the lock button to
05537_Fast&Furious 8060 Ultra_Manual_YV_01200601.indd 37
05537_Fast&Furious 8060 Ultra_Manual_YV_01200601.indd 37
ENGLISH
FAST&FURIOUS 8060 ULTRA
37
2/6/20 16:42
2/6/20 16:42
Publicidad
