The self-cleaning process can take some minutes to get started, it will stop automatically and
the lights will switch off.
Once the self-cleaning process is over, the device will be ready for being used again.
Warning: During the self-cleaning process, the device can reach high temperatures. Do not
touch it. Allow it to cool down before using it again.
The device has a lower cover (Fig. 7). If it is not going to be used for a long period of time,
remove the cover by levering it gently. Pour out the water and place the cover again by pressing
it until it is fixed.
Make sure the steam generator has been cooled down completely before doing this.
When the device is not to be used for a long time, empty the water in the tank, lock the iron onto
the heatproof stand and store it.
To store the supply steam hose and power cord along the cord slot: Firstly, fold the steam
supply hose in two and wind it along the cord slot, then fix it at the cord slot. Secondly, fold the
power cord in two and wind it along the cord slot, then fix it at the cord slot (See Fig.8).
Fig. 8
5. TECHNICAL SPECIFICATIONS
Product reference: 05537
Product: Fast&Furious 8060 Ultra
2520-3000 W, 220-240 V~, 50-60 Hz, IPX0
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
05537_Fast&Furious 8060 Ultra_Manual_YV_01200601.indd 41
05537_Fast&Furious 8060 Ultra_Manual_YV_01200601.indd 41
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimise the recovery and recycling
of the materials they contain, and reduce the impact on human health and
the environment.
ENGLISH
FAST&FURIOUS 8060 ULTRA
41
2/6/20 16:42
2/6/20 16:42