cecotec FAST&FURIOUS 8060 ULTRA Manual De Instrucciones página 38

ENGLISH
the lock position in order to rest the iron in the base.
To unlock it, push the lock button to the unlock position, then the iron is ready to use. The
whole steam station can be lifted up by grasping the iron' s handle, provided that the iron is
not locked on the unit base.
Fig. 4
Steam trigger
After pressing the power switch and choosing the desired steam power level, it will indicate
that the device can be used when the steam power level indicator changes from flashing
to steady. Then, press the steam trigger gently for steam to be sprayed from the soleplate
continuously.
When the steam trigger is completely loosened, the appliance can only be used for dry ironing
without steam.
Fig. 5
Steam burst
Press the steam trigger twice within 1 second to activate the steam burst function. The steam
burst can be used to remove the toughest creases.
Refill indicator
When the level of water in the tank is low, this light indicator will turn on, the device will beep
and will stop working. When this happens, add water into the tank. For this, remove the water
tank and refill it with water through the filling opening, then put the water tank back in its
position.
Fig. 6
Descaling indicator
If the descaling indicator light turns on, it means that the steam generator must be cleaned
of any mineral deposits. At this point, descale it following the steps on the "Cleaning and
maintenance" section. When the system ensures the mineral deposits have been removed, the
indicator will switch off.
Cord slot
When it's not being used, the steam supply tube and power cord can be wound along the cord
slot for storage.
Auto-off
The appliance will turn off automatically after 10 minutes of inactivity.
Dry ironing
Place the iron on the heatproof stand of the unit base.
38
FAST&FURIOUS 8060 ULTRA
05537_Fast&Furious 8060 Ultra_Manual_YV_01200601.indd 38 05537_Fast&Furious 8060 Ultra_Manual_YV_01200601.indd 38 2/6/20 16:42 2/6/20 16:42