Calpeda CS-R Serie Instrucciones De Servicio página 12

1.3 Example of a submersible motor data plate
GB
1.4 Recommendations:
Carefully read the documentation supplied with the product. It will allow you to work in complete safety and obtain the best performance the product
is able to offer.
The following instructions refer to the standard version of the motor operating in normal conditions. Special versions, which can be identified by their
product code, may not fully correspond to the information given (supplementary information will be supplied with the manual when necessary).
In accordance with our policy to continually improve the products, the data in the documentation and the product itself may be liable to modification
without the manufacturer being obliged to give prior notice.
Failure to comply with all the indications in this documentation, improper use or unauthorized modifications to the motor will void all forms of
warranty and relieve the manufacturer from all liability for any damage to persons, animals or things.
WARNING Never operate the motor unless it is submerged.
2 SAFETY:
Before working with the product in any way, make sure that the electrical parts of the installation in which the work is to be carried out
have been disconnected from the electricity source.
The motor must be handled, installed, operated, serviced, repaired and disposed of by specialized persons possessing appropriate qualifications
and using the proper tools. In addition, these persons must have studied and understood the contents of this manual and any other documentation
supplied with the product.
Comply with all the safety, accident-prevention and anti-pollution instructions in the documentation when performing each individual operation, as
well as any more restrictive, local regulations. For safety reasons, and to comply with the warranty terms, the purchaser is forbidden to use the
motor if it operates in a faulty way or if there are sudden changes in the performance it provides.
Installation must be performed in such a way as to prevent accidental contacts that could represent a danger hazard for persons, animals or things.
Alarm systems, inspection and maintenance procedures must be provided to prevent any form of risk caused by faulty operation of the motor.
Consult chapter 4 'Storage and handling' for instructions about how to safely handle and store the product.
12