Publicidad
Idiomas disponibles
Idiomas disponibles
• Place the hair dryer on non-flammable surfaces only. Risk of fire!
• Do not place the device on or near wet towels after use. Risk of electric shock!
• Ensure that no hair can be directly sucked into the device. Risk of fire!
Important
• Do not jam the mains cable
• Untangle the mains cable
• Do not pull, twist or bend the mains cable
ed objects or hot surfaces. Damaged or tangled mains cables increase the risk of electric
shock!
Note
The device has a contact sensor
your hand around the contact sensor
switch
.
6
Note
A slight odour initially develops after switching on the device for the first time. This is normal
and not harmful to your health. Allow the device to run for three to five minutes. After that you
can use the device as normal.
Drying the hair
> Switch on the hair dryer using the blower switch
red and the device starts as soon as you touch the contact sensor
1 Gentle air flow
2 Strong air flow
> Select the heat setting using the heat setting switch
1 Low temperature
2 Medium temperature
3 High temperature
> Dry and/or style your hair as desired.
After each use/at each break, always switch o the hair dryer at the blower switch
(setting 0)
> For your safety, the device switches o automatically if it overheats.
> Pull the mains plug out of the socket and allow the device to cool down.
> Before switching on again, check the air outlet
dust and hair that has been sucked in).
> Do not place the device on or near wet towels after use.
in drawers or doors, for example.
10
if it is twisted.
10
and do not pull or route it over/on sharp, point-
10
. This means that the device only turns on when you place
7
on the handle and have already switched on the blower
7
18
. The operating light
6
7
:
5
and the filters
2
3
starts to light up
8
:
for blockage (e.g. flu ,
6
Publicidad
