Stihl FW 20 Instrucciones De Servicio página 6

: Press the guide tube down in the
direction of the arrow until the
wheel (4) hovers above the ground
with the swivel arm.
: Hold the cart in this position.
:
Move the lever (3) for cutting depth
adjustment to position B –
the cutting depth adjustment is
engaged.
: Relieve the guide tube – the wheel
of the swivel arm rests on the
ground.
FW 20
Mount the cut-off machine
: Position the cut-off machine so that
the pins (5) protrude into the holes
in the support (6).
:
The handle (7) must rest in the
bracket (8) and the handle (9)
presses down into the holder (10).
: Turn the locking lever (11) over the
hand guard and engage it.
: The locking pawl (12) advances and
holds the handle in position.
Mounting the throttle control
: Push the throttle control (13)
sideways onto the handle (9) and
engage it.
English
13