Publicidad
Idiomas disponibles
Idiomas disponibles
28
HOW
TO USE
Automatic
Icemaker
* Depending
on the model,
some
of the
following
functions
may not be available.
Ice is made
in the automatic
icemaker
and
sent to the dispenser.
The icemaker
will
produce
70-210
cubes
in a 24-hour
period,
depending
on freezer
compartment
temperature,
room
temperature,
number
of door openings
and
other
operating
conditions.
It takes about
12 to 24 hours for a newly
installed
refrigerator
to begin
making
ice
Wait
72 hours for full ice production
to occur
• Ice making
stops when the in-door
ice bin is full
When
full, the in-door
ice bin holds approximately
6 to 8 (12-16
oz or 340N455
cc) glasses
of ice
• The water pressure
must be between
20 and 120
psi (140 and 830
kPa)on
models
without
a water
filter and between
40 and 120 psi (280
and 830
kPa) on models
with a wafer filter to produce
the
normal
amount
and size of ice cubes
• Foreign
substances
or frost
on the ice-detecting
sensor
can interrupt
ice production
Make sure the sensor area is clean at all times
for proper
operation
Icemaker
Switch
Ice -defecflng
Sensor
f
Wafer
fills
the ice fray.
I hour
later from
supplying
water
• 60
minutes
after water
has been
added
to the ice tray, the ice tray wilt sit slightly
tilted
to help the cold air reach the ice
* The
ice-detecting
sensors
will sense
when
the ice is ready to be dumped
into the ice bin.
Turning
the Automatic
Icekarner
On or Off
To turn
off the automatic
icemaker,
set the
icemaker
switch
to
OFF (0). To turn
on the
automatic
icemaker,
set the switch
to ON (t).
Publicidad
