Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOT
NG
45
Frost
or ice
crystals
on frozen
food
(inside
of
sealed
package)
Condensation
from food with a
high water content
has frozen
inside of the food package
This is normal for food items with a high water
content
Food has been left in the freezer
Do not store food items with high water content
for a long period of time
in the freezer
for a long period
of time.
Icemaker
is not
Demand
exceeds ice storage
The icemaker
will produce
approximately
making
enough
capacity
70~210
cubes in a 24 hour period
ice
House water supply is not
connected,
valve is not turned
on fully, or valve is clogged
Water filter has been
exhausted.
Low house water supply
pressure
Reverse Osmosis filtration
system is used.
Tubing connecting
refrigerator
to house supply valve is kinked
Connect
the refrigerator
to a cold water supply
with adequate
pressure and turn the wafer
shutoff
valve fully open
If the problem
persists, it may be necessary to
contact
a plumber
It is recommended
that you replace
the water
filter:
Approximately
every six months
When
the wafer filter
indicator
turns
on.
When the water dispenser
output
decreases.
When the ice cubes are smaller than normal
The water pressure
must be between
20 and 120
psi (140 and 830 kPa) on models
without a wafer
filter and between
40 and 120 psi (280 and 830
kPa) on models with a water filter.
If the problem
persists, if may be necessary
to contact
a plumber.
Reverse osmosis filtration
systems can reduce
the water pressure
below the minimum
amount
and result
in icemaker
issues
(Refer
to Wafer
Pressure
section.)
The tubing can kink when the refrigerator
is
moved during installation
or cleaning
resulting
in reduced
water flow
Straighten
or repair the
wafer supply line and arrange
it to prevent future
kinks.
Publicidad
