WAGNER FINISH CONTROL 4000 18V Manual De Instrucciones página 20

EN
CONTENTS
Translation of the original operating instructions
Contents
1 SAFETY REGULATIONS ______________________ 14
2 EXPLANATORY DIAGRAM ____________________ 18
3 THE WAGNER CLICK&PAINT SYSTEM __________ 18
3.1 Disassembly of the spray gun __________________ 18
4 TECHNICAL DATA ___________________________ 19
5 INTRODUCTION TO SPRAYING USING THE XVLP
PROCEDURE ________________________________ 19
6 COATING MATERIAL _________________________ 19
6.1 Coating Materials Suitable for Use _______________ 19
6.2 Coating Materials Not Suitable for Use ___________ 19
6.3 Coating materials that can only be processed with rel-
evant spray attachment (accessories) ____________ 19
6.4 Preparing the coating material __________________ 19
7 SETTING THE SPRAY GUN ____________________ 20
7.1 Setting the required spray pattern _______________ 20
7.2 Setting the amount of material _________________ 20
7.3 Setting the amount of air ______________________ 20
7.4 Align the feed tube ___________________________ 20
8 CHARGING _________________________________ 20
9 STARTING OPERATION ______________________ 21
10 SPRAYING TECHNIQUE ______________________ 21
11 BREAKS IN WORK ___________________________ 21
12 TRANSPORTATION __________________________ 21
13 TAKING OUT OF OPERATION AND CLEANING __ 21
13.1 Assembly ___________________________________ 22
14 MAINTENANCE _____________________________ 22
14.1 Air filter ____________________________________ 22
14.2 Air relief valve _______________________________ 22
15 CORRECTION OF MALFUNCTIONS ____________ 23
16 ACCESSORIES AND SPARE PARTS _____________ 24
16.1 Accessories _________________________________ 24
16.2 Spare parts FinishControl ______________________ 24
16.3 Spare Parts FineSpray spray attachment __________ 24
16.4 Spare Parts StandardSpray spray attachment ______ 25
Testing of the unit ________________________________ 26
Note on disposal _________________________________ 26
14
FinishControl 4000 18V
Important information on product liability ____________ 26
Guarantee declaration _____________________________ 26
CE - declaration __________________________________ 26
European service network _________________________ 142
Explanation of symbols used
This symbol indicates a potential danger
for you or for the device.
Under this symbol you can find important
information on how to
avoid injuries and damage to the device.
Indicates tips for use and other particularly
i
useful information.
Wide spray jet setting
Narrow spray jet setting Narrow spray jet setting
1
SAFETY REGULATIONS
All local safety regulations in force must be observed.
WARNING! Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to fol-
low all instructions listed below may result in electric shock,
fire and/or serious injury. Save all warnings and instructions
for future reference. The term "power tool" in the warnings re-
fers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.