WAGNER FINISH CONTROL 4000 18V Manual De Instrucciones página 24

EN
EXPLANATORY DIAGRAM/ CLICK&PAINT SYSTEM
2
EXPLANATORY DIAGRAM (FIG. 1)
POS. DESIGNATION
1 Spray attachment complete
2 Spray jet width adjustment
3 Air cap (to set the working direction)
4 Ventilating hose
5 Valve
6 Container seal
7 Suction tube
8 Feed tube filter
9 Container
10 Trigger (actuates turbine starting switch   material is
conveyed)
11 Material volume regulation
* Not included with all models.
3
THE WAGNER CLICK&PAINT SYSTEM
With the Wagner Click&Paint System, the front part of the gun (spray attachment) can be replaced quickly and easily.
This enables a rapid material change without cleaning, and ensures that the right tool is available for every material and applica-
tion.
The following spray attachments are available:
Spray attachment
StandardSpray (yellow)
Order No. 2430386
FineSpray (brown)
Order No. 2430385
WallSpray (white)
Order No. 2430387
3.1 DISASSEMBLY OF THE SPRAY GUN
For assembly, insert the spray attachment into the FC 4000 so that the two arrows point at each other. Turn the FC 4000 90° in
the arrow direction until it audibly engages. (Fig. 2)
To remove the spray attachment, push the catch (Fig. 2, A) beneath the trigger down and turn the spray attachment by 90°.
18
Area of application
Spray attachment with slit nozzle and 1000 ml aluminium container. Processes all standard paints.
Spray attachment with round nozzle and 1000 ml aluminium container. Ideal for low-viscosity paints
and glazes.
Dispersion spray attachment with slit nozzle and 1400 ml plastic container. Designed for processing
dispersions.
FinishControl 4000 18V
POS. DESIGNATION
12 Air filter cover
13 Battery indicator
14 Air volume control
15 Air filter indicator (lights up red if the air filter is
blocked)
16 Rechargeable battery*
17 Battery lock*
18 Charger*
19 Cleaning brushes (4 pcs.)
20 Transport case*