ENGLISH
dampness infiltrations into the
electrical circuit system.
This appliance is for indoor
•
use only.
Do not use steam jet or high-
•
pressure cleaners.
Do not use any electronic
•
devices
to
defrosting process if they
have not been recommended
by the manufacturer.
Do not expose the appliance
•
to
humid
temperatures.
Fire hazard: do not use
any
adapters or extension
cords, they may be
dangerous.
Do not use any extension cord
•
or multiple plug adapter.
If the connection cable is too
•
short, contact an authorized
technician
electric installation properly.
The back part of the appliances
•
should not be in contact with:
power supply units or multi
socket adaptors.
Check and verify that the
•
voltages are compatible (this
appliance must be connected
to
a
230V/60Hz power supply). If
they are not compatible you
must contact the seller or
an authorized professional
30
shorten
the
areas
or
high
non-authorized
to
adapt
the
220~240V/50Hz;
technician.
The circuits of the fridge
•
must be isolated. The cross
sectional area of the cable
must be more than 0,75 mm.
You
should
•
appliance if you´re not using
it.
You must not unplug the
•
appliance by pulling on the
power cord. You must not
use the power cord wrapped
around the appliance either.
The power cord must not be
•
near any hot surface.
Do not use the appliance if
•
there is any damage on the
power cord. Contact the after
sales service or an authorized
professional technician.
In the event of a gas leak (from
•
the appliance), do not try to
pull the plug in any direction
because it could cause a fire.
You must not place any
•
object in the back part of the
appliance.
The refrigerant used in this
•
product
is
is
respectful
environment (although it is
also flammable). Make sure
the refrigeration system is not
damaged during transport
and installation.
In the event of a leak, keep
•
the fridge away from the
fire or the heat source and
unplug
the
R600a,
which
with
the