6 Maintenance
6.1 Periodic maintenance
The heat exchangers, condensation tray and
condensation drain should be cleaned once every 4
years. Proceed as follows:
1. Remove the plastic front (A)
2. Remove the sheet steel front (B)
3. Allow some room for the power cable and
communications cable, and remove the cover (C)
under the evaporator
4. Pull the cooling skid (D) no more than 25 cm
forwards.
5. Clean the evaporator, condenser and the condenser
tray with a mild cleaning agent. Take care not to
damage the evaporator and condenser fins. If the fins
are bent, they can be repaired with a fin-comb. Rinse
the cleaned components with water.
EN - 18
D
C
B
A