Fein SLUGGER AJMU 137 PMQW AS Serie Instrucciones De Uso página 25

Adjusting the stroke range
(figure 14).
Hold the power tool firmly
CAUTION
with one hand when releas-
ing the two fastening levers.
To move the fastening levers over each
other, pull a fastening lever outward and
then turn the fastening lever in 45° steps.
Loosen both fastening levers with the other
hand.
Adjust the desired stroke range.
Tighten both fastening levers again.
Fig. 14
2.
2.
1.
4.
2.
4.
2.
3.
1.
en
25
1.
3.
2.
4.
2.
4.