Publicidad
Idiomas disponibles
Idiomas disponibles
en
6
To avoid injuries, check the core drill bits
prior to starting the work. Use only undam-
aged core drill bits that are not deformed.
Damaged or deformed core drill bits can
cause serious injury.
Before putting into operation: Mount the
chip guard to the machine.
Always secure the power tool with the sup-
plied safety strap. When carrying out such
work, beware of falling objects, such as
cores or chips.
Carry out work on vertical construction ele-
ments or overhead without use of the hand
pump. Use cooling-lubricant spray for these
applications. Fluids entering into the power
tool create the risk of electric shock.
Avoid touching the drilled core that is auto-
matically ejected by the pilot pin when the
working procedure is finished. Contact with
the core when it is hot, or if it falls, can cause
personal injuries.
To prevent injuries, always keep your hands,
clothing, etc. away from rotating swarf. The
swarf can cause injuries. Always use the
chipping protector.
Do not attempt to remove the cutting tool if
it still turns. This can lead to serious injuries.
Beware of any concealed electric cables,
gas or water conduits. Check the working
area before commencing work, e. g. with a
metal detector.
Do not work materials containing magne-
sium. Danger of fire.
Do not work CFP (carbon-fiber-reinforced
polymer) and materials containing asbestos.
These materials are considered carcinogenic.
Do not rivet or screw any name-plates or
signs onto the power tool. If the insulation is
damaged, protection against an electric
shock will be ineffective.
Do not overload the power tool or the stor-
age case and do not use it as a ladder or
stand. Overloading or standing on the
power tool or the storage case can lead to
the upward shifting of the center of gravity
of the power tool or the storage case, and its
tipping over.
Do not use accessories which are not specif-
ically designed and recommended by the
power tool manufacturer. Safe operation is
not ensured merely because an accessory
fits your power tool.
Clean the ventilation openings on the power
tool at regular intervals using non-metal
tools. The blower of the motor draws dust
into the housing. An excessive accumulation
of metallic dust can cause an electrical haz-
ard.
Use and handling of the battery
(battery pack)
These safety warnings apply only for 18V
FEIN AMPShare lithium-ion batteries.
Use the battery only in AMPShare partner
products. 18V batteries marked with AMP-
Share are fully compatible with the follow-
ing products:
– All products of the FEIN-18V-AMPShare
system
– All 18V products from AMPShare part-
ners.
When working with and charging incorrect,
damaged, repaired or reconditioned batter-
ies, imitations or other brands, there is dan-
ger of fire and/or explosion.
Observe the battery recommendations in the
operating instructions for your product.
Only in this way can the battery and the
product be operated safely, and the batteries
are protected from dangerous overload.
Only charge the batteries with chargers rec-
ommended by FEIN or one of the AMPShare
partners. A charger that is suitable one type
of battery pack may create a risk of fire
when used with another battery pack.
The battery is supplied partially charged. To
ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
Store batteries out of the reach of children.
Batteries must not be disassembled, opened
or reduced in size. Do not subject batteries
to mechanical impact or shock. Hazardous
vapors and fluid can escape in case of dam-
age and improper use of the battery. The
vapors can irritate the respiratory system.
Liquid ejected from the battery may cause
skin irritations or burns.
Publicidad
