Publicidad
Idiomas disponibles
Idiomas disponibles
Repair and customer service.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
Application tools, hand pump, battery
Drill-motor guide (figure 19).
After several hours of operation, the play in the dove-tail guide can increase. As a conse-
quence, the drill motor can glide along the dove-tail guide by itself. This can lead to the
motor drifting down and damaging the cutting tool. In this case, retighten all fastening screws
of the dove-tail guide correspondingly so that the drilling motor can easily be moved man-
ually, yet does not glide by itself.
Fig. 19
2,5 mm
1.
Fastening
screws
2,5 mm
3.
5.
Drill-motor
guide
2.
2,5 mm
4.
en
31
6.
7.
Publicidad
