EINHELL GE-WS 18/150 Li Manual De Instrucciones página 19

10. Troubleshooting guide
Problem
The motor does not
start.
The equipment
does not spray,
or only sprays at
reduced power,
even though the
tank is full.
Too much spray
mist.
Motor stops
suddenly.
Anl_GE_WS_18_150_Li_USA_SPK7.indb 19 Anl_GE_WS_18_150_Li_USA_SPK7.indb 19
EN
Possible cause
a) Equipment not switched on.
b) Connections on motor loose.
c) Battery not correctly inserted.
a) Nozzle completely or partly clogged.
b) The intake fi lter in the tank is completely
or partly soiled.
c) The fi lter element in the handle is
completely or partly soiled.
d) Liquid too viscous and therefore
unsuitable.
a) Distance from object is too great.
b) Spray width too great.
Battery spent.
- 19 -
Solution
a) Turn On/Off switch to "I" (see
section 6.).
b) Have the equipment checked
by a customer service
workshop.
c) Remove battery and reinsert
(see section 5.4).
a) Clean the nozzle (see section
7.2).
b) Clean the intake fi lter (see
section 7.3).
c) Clean the fi lter element (see
section 7.4).
d) Remove liquid, clean
equipment and container
(see section 7.).
a) Reduce spraying distance.
b) Reduce spray width (see
section6.3.2).
Insert a charged battery (see
section 5.4).
25.07.2023 14:54:36 25.07.2023 14:54:36