Publicidad
Step 27
å
NOTE: Be sure to position the RETURN TOP exactly as shown.
å
Insert two SHORT WOOD DOWELS (20) into the exact holes shown in the RETURN TOP (F).
å
Fasten a TOP RAIL (R) to the RETURN TOP (F). Use two BLACK 1-1/8" FLAT HEAD SCREWS (29).
å
NOTE: Be sure the SHORT WOOD DOWELS in the RETURN TOP insert into the holes in the TOP RAIL.
å
Fasten two BRACKETS (21) to the RETURN TOP (F). Use four BLACK 1/2" PAN HEAD SCREWS (31).
å
With a drill and 3/16" drill bit, finish drilling through the exact four holes shown in the RETURN TOP (F).
CAUTION
Make sure you have
packing foam or
throw away material
underneath the
return top near the
drill area.
29
BLACK 1-1/8" FLAT HEAD SCREW
(2 used in this step)
Large hole
Page 32
R
20
Rounded edge
www.sauder.com
Drill through these
four holes.
F
31
BLACK 1/2" PAN HEAD SCREW
(4 used for the BRACKETS)
21
433361
Publicidad
