Publicidad
Step 27
NOTE: Be sure to position the RETURN TOP exactly as shown.
å
Insert two SHORT WOOD DOWELS (20) into the exact holes shown in the RETURN TOP (F).
å
Fasten a TOP RAIL (R) to the RETURN TOP (F). Use two BLACK 1-1/8" FLAT HEAD SCREWS (29).
å
NOTE: Be sure the SHORT WOOD DOWELS in the RETURN TOP insert into the holes in the TOP RAIL.
å
Fasten two BRACKETS (21) to the RETURN TOP (F). Use four BLACK 1/2" PAN HEAD SCREWS (31).
å
With a drill and 3/16" drill bit, fi nish drilling through the exact four holes shown in the RETURN TOP (F).
å
CAUTION
Make sure you have
packing foam or
throw away material
underneath the
return top near the
drill area.
Drill through these
four holes.
21
BLACK 1/2" PAN HEAD SCREW
(4 used for the BRACKETS)
Page 32
F
31
www.sauder.com
BLACK 1-1/8" FLAT HEAD SCREW
(2 used in this step)
Large hole
Rounded edge
29
R
20
433361
Publicidad
