Webasto ProCore Edge 9 Manual De Operación Y Mantenimiento página 44

ProCore Edge North America
8.2 Buttons
NOTE
ProCore Edge starts charging automatically when you connect a
vehicle. You can disconnect a vehicle safely from ProCore Edge even
while charging. You do not need to start or stop the charge with the
following buttons.
Button
Start
Stop
31241-03-0202
Function
If the charger is in the Charge Stopped state, then press the
Start button (Figure 23) momentarily to restart the charge.
Press and hold the Start button for three seconds to switch
from the graphical battery display (Figure 23) to the alternate
tabular battery display (Figure 24). Press and hold the Start
button for three seconds again to switch back to the graphical
battery display.
Press the Stop button (Figure 23) to stop the charge.
The charger displays, on the status bar, "Charge Stopped."
44 of 68
Webasto Charging Systems, Inc.
IOMM