Webasto ProCore Edge 9 Manual De Operación Y Mantenimiento página 61

IOMM
Display
Message
BATT UNDER
VOLTAGE
(Battery under
voltage)
Battery
Communication
Timeout
Battery
Connection
Issue
Battery Data
Invalid
Webasto Charging Systems, Inc.
Message Description
type
The battery voltage is too
low to start the fast charge
(the voltage is below the
battery table minimum
voltage limit).
The battery is drained to a
voltage below a safe level
for charging. Recovery
charge is needed.
Fault
The battery voltage is too low
(i.e., below the operational
voltage limit) to use on this
charger
The BMID number of
battery cells setting is
incorrect.
Communication with the
Fault battery was lost over the
communication bus.
Battery initialization failed
Fault
during connection.
The BMID configuration
Fault data read from the battery
are not valid for the charge.
ProCore Edge North America
Action(s)
Press and hold the EQ
Schedule button to initiate
a recovery charge and
raise safely the battery
voltage.
Use a charger that supports
the battery voltage.
Use the ProCore™ App
BMID setup to set the
correct number of
battery cells.
Check the communication
wires.
Check the battery
communications wiring
for damage.
Use the ProCore App to
recheck the battery
parameters in the BMID.
61 of 68
31241-03-0202