Helo RONDO 96 Instrucciones De Uso E Instalación página 24

OK
=
The heater is Press the OK
on the button and hold
simmering mode down for appr.
3 seconds.
Next the lower display shows the latest set sauna time by flashing. Also the sauna use time can be controlled by using
the + and – buttons as long as the display is flashing. The sauna use time can be set to 0 – 2 hours. The setting is stored
just like with the temperature either by using the OK button or by waiting for about 3 seconds.
=
The stored sauna
time flashes on
the lower display.
Then the heater is transferred to full power for the desired period. If a sensor element (OLET 19) obtainable as an
accessory has been installed in the sauna space, the remaining sauna use time and the sauna room temperature are
alternatively shown in the lower display. The upper display shows the temperature of the stone space.
Alteration of the sauna use period and sauna room temperature in the lower display
when the sensor element OLET 19 (accessory) is installed in the sauna room
Distinguishing the full power
The heater is automatically transferred to simmering mode once the sauna use period has expired. If use of the sauna is
to be interrupted before the sauna use time has expired, it can be done by pressing the OK button and by pressing and
holding the button down for about 3 seconds. Then the heater is transferred back to the simmering mode and the stone
space temperature is lowered until reaching the set simmering mode temperature.
The lid of the heater can be closed immediately when the heater is transferred to the simmering mode i.e. there is no
need to wait for the cooling of the stones.
Heater in full
power mode
=
The saved stone
space temperature
flashes on the
upper display.
OK
=
The sauna time Changed sauna
can be changed time
by the + and
buttons.
OK
=
Press the OK
button and hold
it down for appr.
3 seconds.
OK
= =
The stone space Changed stone
temperature can space temperature by pressing the
be changed by +
and buttons.
OK
=
Save the change
by pressing the OK
button or wait for
appr. 3 seconds
=
Heater goes to
simmering mode.
OK
=
Save the change
OK button or
wait for appr.
3 seconds.
=
The heater goes
to full power mode
5