Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Changing the Light
This product contains a light source of energy efficiency class F for top light and exempted
of energy class for side light.
Light sources in this product can only be replaced by qualified professionals.
Please contact after-sales service if a light source fails.
The light sources shall be removed at the end of the product's useful life, with sorting and
recycling done separately.
Starting to use
• Before initial start, keep the refrigerator still for two hours before connecting it to power
supply.
• Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or
for above 4 hours in summer when the ambient temperature is high.
648 mm
• Spare enough space for convenient opening of the doors and drawers or statement by the
distributor.
833 mm
1000
mm
135°
1400 mm
8
EN
B
Using the appliance
Energy saving tips
• The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the
appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality,
or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient
• Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
9
EN
Publicidad
