Descargar Imprimir esta página

geberit ACO 103PLUS Manual De Operación página 25

Ocultar thumbs Ver también para ACO 103PLUS:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
Item
Designation
no.
7
Green LED
8
Red LED
9
Blue LED
10
Start button
11
Charge level indicator Shows the capacity of the rechargeable battery.
12
Warning note sticker
13
Rechargeable battery
14
Release button
15
Compatibility mark
Radio interface
16
symbol
17
Specification plate
1)
The Bluetooth® brand and its logos are the property of Bluetooth SIG, Inc. and are used
under licence by Geberit.
Radio interface function
The pressing tools with the type designation "plus" are equipped with a Bluetooth® radio
interface. When used together with a mobile end device (iOS or Android) and the NovoCheck-
App (www.novopress.de), the following functions are available:
• reading out data, such as the number of pressing operations, tool status, serial number
• checking the tool electronics
• setting the pressing point light (if available) and the time until the idle state
• creating construction site reports
To establish a connection between the pressing tool and an end device, the pressing tool must
be ready for operation (tap the start button, green LED lights up, blue LED flashes) and the
NovoCheck-App must be installed on the end device. The blue LED lights up when the
Bluetooth® connection is successfully established.
The blue LED goes out if it was not possible to establish a connection to the end device before
the first pressing operation. The pressing tool must be completely switched off and on again
before establishing a connection can be reattempted. The rechargeable battery must also be
removed briefly.
72057595934256523 © 12-2023
968.403.00.0(03)
Function/description
• Lights up: tool is ready for operation.
• Flashes: malfunction → See "Rectifying malfunctions",
page 30.
Lights up or flashes: malfunction → See "Rectifying
malfunctions", page 30.
• Lights up: radio communication is active.
• Flashes: radio communication can be established.
• Briefly press the button: activates the tool from idle state.
• Long press (> 2 sec.): starts the pressing procedure.
• Warning sign: hazard from flying fragments.
• Safety note: read the operating instructions before
commissioning and using the tool.
Only use Geberit lithium-ion batteries of type
Milwaukee 12 V.
Push in both release buttons: rechargeable battery can be
pulled out.
Pressing attachments with this mark
the pressing tool.
1)
Bluetooth®
radio interface
are compatible with
2 / 2
25
EN

Publicidad

loading