GRE EESB55 Manual Del Usuario página 3

EN
IMPORTANT
This machine should not be used by persons (including children) with reduced physical,
sensory or mental abilities, nor by people who have no experience or knowledge of it, unless
they benefited from supervision or prior instructions concerning the use of the device, by a
person responsible for their safety (NF EN 60335-1/A1).
End-of-life of the machine
If you wish to replace or dispose of the machine, do not discard it as household waste nor put
it in your local recycling containers.
On a new machine, this symbol means that the equipment must not be thrown out as trash
and should be specifically collected in order to be re-used, recycled or valorized. If it contains
substances that are potentially dangerous for the environment, these must be
eliminated or neutralized. You can give the machine to a charitable or social organization
which can repair it and put it back in circulation again. If you buy a new machine, you can
leave the old one at the point of purchase or request that the delivery company take it back.
This is known as a "one for one" return.
If not, bring the machine to a drop-off recycling center, if your locality has set up selective
collection of these products.
Note:
The "CE" conformity mark certifies conformity with directive 89/336/CEE relating to electro-
magnetic compatibility, and directive 2006/95/CE relating to the safety requirements of elec-
trical equipment.
"This machine is conformed to directive IEC/EN 60335-1 +A1: 2010"
This machine must be installed on an installation conformed with directive CEI 60364-1.
- working temperature max <40 º C
- working humidity
- the machine must be installed in a well- ventilated place
Characteristics
Model Electrolyseur Sel 101347 230V - 50/60 Hz
This machine is made in FRANCE by
FLUIDRA INDUSTRY FRANCE.
After Sales Service: FLUIDRA INDUSTRY FRANCE
661 Avenue Jean-Baptiste Biot 66000 PERPIGNAN
FRANCE
At minimum, the spare parts of this product will be available throughout its commercial life,
extended of the warranty period.
2. Recommendations
Please respect the following values in the order to ensure the proper operation of this elec-
trolyzer:
Salt concentration
pH
TAC
Stabilizer
max <80% without condensation
Recommended
Minimum
Recommended less than
Recommended between
Between
Recommended
4,0 g/l
3,2 g/l
7,6
10 et 15 º F
20 a 80 g/m3
40 g/m3