Operating instructions
Status at
10/2021
EN
Ergonomic desk, electrical drive with continuously adjustable height.
Read the operating instructions through carefully and keep them for future
reference.
These operating instructions are directed at the works officer in charge, who must transfer them to the
personnel responsible for the installation, connection, use and maintenance
of the table base.
A PDF of the assembly instructions and safety information is available on our
homepage or can be ordered at:
info@hammerbachergmbh.de
He or she must ensure that the information in the operating instructions and in the enclosed documents are
read and understood.
The operating instructions must be stored in a known and easily accessible location and must be referred to
in any case of even the slightest doubt.
The manufacturer does not accept any liability for damage to persons, animals, property or the table base
itself, caused by incorrect use or by a failure to observe or to sufficiently observe the safety criteria in these
operating instructions or that is caused by modifications to the table base or the use of unsuitable spare
parts.
Identifikation:
Electrically adjustable desk
Typ: see enclosed mounting instructions
Hammerbacher GmbH
Daimlerstraße 4-6
D-92318 Neumarkt
www.Hammerbacher.de
info@hammerbachergmbh.de
WEEE-Reg.-Nr. DE 34853279
EN
Content
General
Local value of the assembly/operating manual
Intended use
Improper use
Laws, directives and standards to be observed
FCC information for class B digital device (power supplies)
Saftey Information
Symbols/warnings
Safety measures
Note for those assembling the workstation
Transport
Safety/protective measures
Dangers due to electrical energy
Use of the workstation Table
Specific dangers
In an emergency
Cleaning
Noise generated by the workstation Table
Maintenance and upkeep
Persistent risks
Read and keep the operating and installation instruction
Recycling
Operation and indicators
Correct position of seat
English
EN
4
EN
5
EN
6
EN
7
EN
8
EN
9
EN