Descargar Imprimir esta página

Speedaire 45PL19 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
Operating instructions:
cancer and birth defects or other reproductive harm. Always remember to
wash your hands before your meal to prevent the possibilities of intake of
these chemicals after use of this product.
8
Operation Steps
1
Check to see that the assembly and mounting nuts and bolts
are all snug; this must be done, as some fasteners may
become loose in transit.
2
Check that compressor is on a strong, stable level base.
3
Check that air filter is clean.
4
Do not place any materials on or against the compressor unit.
These materials will limit the cooling effect and could
lead to premature failure.
5
Open the air tank outlet valve and start the unit for no load
operation. Allow the unit to operate for a minimum of twenty
minutes in no load condition.
6
After running the compressor for twenty minutes, close
the valve and allow the unit to reach maximum operating
pressure. Ensure that the compressor shuts down at the preset
maximum pressure and the head pressure is released through
the pressure switch.
7
Check the air compressor and piping systems for leakages and
correct as required.
8
Shut off all power to the air compressor before attempting any
repair or maintenance.
This product contains one or more chemicals
which are known to the state of California to cause

Publicidad

loading