Descargar Imprimir esta página

Speedaire 45PL19 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

GENERAL SAFETY INFORMATION
Body color
Materials of
Construction
Advantage
or benefit
Application
Other
information
must be well ventilated. Do not smoke while spraying or spray where
spark or flame is present. Keep compressor at least 12 ~ 18 feet away from
spraying area and all explosive vapors.
Do not expose compressor to rain or operate in a wet area. Never use the
air compressor without connection to a properly grounded outlet with the
specified voltage and fuse protection. Improper grounding can result in
electrical shock.
Do not repair, modify or weld tank, return to authorized service center
if replacement is required. Do not adjust regulator to result in output
pressure greater than allowable maximum pressure which is shown in the
specification. Pressure switch is set at the factory for optimum performance
of your particular model, never bypass or remove pressure switch as
serious damage to equipment or personal injury could result from improper
pressure setting. Before starting compressor, pull pressure relief valve ring
to make sure the valve moves freely. The pressure relief valve is factory
installed to prevent the air tank from damage should malfunction occur in
the pressure switch. It is factory set at a specific limit for your particular
model, and should never be tampered with. Adjustment by user will
automatically void warranty.
2
Product Description
SpeedAire Green powder coat finish.
Aluminum Alloy Cylinder, ASME certified steel tank.
Compact design and light weight for easy portability.
Oil-free pump is maintenance free.
Air Inflation Accessories, Air Brush, Brad Nailers and
Staplers, Caulk Gun, Grease Gun, Engine Cleaner.
Portable Electric Oil-Free Air Compressor, Hot Dog
Tank Type, Weight 40 lb.
Risk of Fire. Do not spray combustible or
flammable liquid in a confined area, spray area
Risk of Electrical Shock. Disconnect compressor
from electrical supply circuit before maintenance.
Risk of Explosion. Disconnect compressor from
electrical supply circuit before maintenance.

Publicidad

loading