Teac VRDS-9 Manual Del Usuario página 5

Connections
Before making connections, be sure to © Be sure to insert each plug securely. To
IMPORTANT (for U.K. Customers)
read the instruction manual of the stereo
prevent hum and noise, do not bundle
DO NOT cut off the mains plug from amplifier carefully and turn the power of the connection cords with the power
this equipment. Ifthe plug fitted is not the styereo amplifier and the player OFF. cord or speaker cord.
suitable for the power points in your PP aa P
home or the cable is too short to reach beaten Pe iaise wiih Digital OUTterminals
a power point, then obtain an e C D player interferes with the tuner, Connect this unit toa digital component
appropriate safety approved extension
Vv reciever, etc., allow a reasonable
(such as a digital amplifier, DAT deck, or
lead or consult your dealer.
distance between them.
another MD deck). (Use the optional
coaxial cord or digital optical cable.)
If nonetheless
the mains plug is cut
@ When a digital optical cable is used for
off, remove the fuse and dispose of @ Connection with a stereo connection, remove the caps protecting
i immediately, to avoid a amplifier/receiver both ends of the optical cable and the
possible shock hazard by inadvertent connectors.When a digital optical cable
connection to the mains supply. LINE OUT jacks is not being used, leave the caps in
If this product is not provided with a Connect the amplifier to the LINE ouT place.
mains plug, or one has to be fitted, then jacks using the pin-plug cord (optional), =P d
follow the instructions given below: making sure to match the color-coded 'ower Cor
plugs fothe eppropriate jacks on the Be sure to connect the power cord to an
N i r e s i n t h i ir components — white to white (L), and red u r
dA ORTANT. The vives ip tle Men to red (R). AC outlet which supplies the correct
the following code: © Connect the 1-pin remote control cord voltage. F
to the remote control jack of the © Hold the power plug when plugging or
GREEN-AND-YELLOW: EARTH amplifier or MD deck (A-H500, MD- unplugging the power cord.
BLUE: NEUTRAL 1500, etc.).
BROWN: LIVE
WARNING: This apparatus must be sterec Amplifier
earthed.
MD Deck
. 2°©°O
© oo
As the colours of the wires in the mains heed
lead of this apparatus may not
correspond with the coloured markings
identifying the terminals in your plug
proceed as follows.
=
°
Oo
The wire which is coloured GREEN- To CD/AUX ao reanots Toi fences To
and-YELLOW must be connected to jacks control jack control jack DisiraL of DIGITAL IN
the terminal in the plug which is COAXIAL OPTICAL,
marked by the letter E or by the safety a 3 6
earth symbol + or coloured GREEN or Hi
GREEN-and-YELLOW.
Rex pln cord Remo Coaxial |_| Digital optical
The wire which is coloured BLUE must
be connected to the terminal which is j Remote conerol:cord
marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN
must be connected to the terminal
which is marked with the letter L or
coloured RED.
be used and be sure to re-fit the fuse
cover,
IF IN DOUBT — CONSULT A
COMPETENT ELECTRICIAN.