Descargar Imprimir esta página

Olimpia splendid Bi2 WALL AR 1000 Instrucciones Para El Uso Y El Mantenimiento página 43

Ocultar thumbs Ver también para Bi2 WALL AR 1000:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 121
injury.
23. Never use a flammable spray such as hair spray, lacqueror paint near
the unit. It may cause a fire.
24. Do not touch the horizontal air outlet flaps when the swing function
is active. Fingers may become caught or the unit may break down.
25. Do not obstruct the air inlet and outlet grids in any manner.
26. Do not insert extraneous items in the air inlet and outlet grids as this
will create the risk of electrical shocks, fire or damages to the appli-
ance.
Objects touching the fan at high speed can be dangerous.
27. Do not inspect the unit or perform maintenance personally. Repairing
the appliance yourself is extremely dangerous. Contact a qualified
professional.
28. Do not dispose this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessar.
29. The most common cause of overheating is dust or lint deposit in the
appliance. Regularly remove these accumulations by disconnecting
the appliance from the power socket and vacuuming the grids.
30. In the event that you decide not to use an appliance of this type
anymore, it is recommended to make those parts of the appliance
susceptible to constitute a danger harmless, especially for children
which may use the out-of-order appliance for their own games.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CAUTION
1. Before installing the unit, it is necessary to check whether the ground
wire is charged.
If it is, the unit shall not be installed before correction.
2. Ground the air conditioner.
Do not connect the ground wire to gas or water pipes, lightning rod or
a telephone ground wire. Incomplete grounding may result in electric
shocks.
3. Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may result in electric shocks.
4. It is not allowed to connect the appliance to the power supply before
the electric wiring and hydraulic connection have been performed.
5. While following the instructions in this installation manual, install
drain piping in order to ensure proper drainage and insulate piping
in order to prevent condensation.
Improper drain piping may result in water leakage and property dam-
age.
Bi2 WALL AR 1000/1200/1400
EN - 7

Publicidad

loading

Este manual también es adecuado para:

Bi2 wall ar 1200Bi2 wall ar 1400