Olimpia splendid Bi2 WALL AR 1000 Instrucciones Para El Uso Y El Mantenimiento página 46

0.5 - INSTALLATION INFORMATION
1. To install properly, please read this "installation manual" at first.
2. The air conditioner must be installed by qualified persons.
3. Follow the manual as closely as possible during the installation of
the appliance and piping.
4. If the appliance is installed on a metal surface of the building, it must
be isolated electrically pursuant to the standards in force regarding
electrical equipment.
5. When all the installation work is finished, please turn on the power
only after a thorough check.
0.6 - HAZARDOUS ZONES
• The fan coil must not be installed in environments with the presence
of inflammable gases, explosive gases, in very humid environments
(laundries, greenhouses, etc.), or in places with other machines that
generate a strong heat source, in proximity of a sources of salt water
or sulphurous water.
• DO NOT use gas, gasoline or other inflammable liquids near to the
fan coil.
• Only use supplied components (see paragraph 1.2). The use of
non-standard parts may cause water leaks, electric shocks, fires and
injuries or damages to things.
• Do not install the appliance in areas characterised by brackish air
(near to the coast, etc.).
If electrical appliances are disposed of in landfills or dumps, hazard-
ous substances can leak into the groundwater and get into the food
chain, damaging your health and well-being.
0.7 - PROPER USE
• The fan coil must only be used to heat, cool, dehumidify and filter
the air (by choice) with the exclusive purpose of making the room
temperature comfortable.
• This appliance is only intended for a domestic use or similar
not for commercial or industrial use.
• An improper use of the appliance with possible damages caused
to people, property or animals relieves the manufacturer from any
liability.
EN - 10
;