Publicidad
Idiomas disponibles
Idiomas disponibles
4.5.2 Remote control with batteries
1
2
> Pull out the battery
compartment.
> Press the lever to fully
open the battery
compartment.
> Remove the protective
film.
4.6
Pairing Remote Control
Activate the pairing mode with the remote control if the LED on the top of the remote
control flashes red.
> Ensure that the product is activated (power button/status display (LED) lights up
green).
> Press the Bluetooth button/Bluetooth display (LED) on the product for several
seconds.
> Press and hold the stop button on the remote control.
> First press the left arrow, then press the right arrow on the button spray wand
position.
The LED on the top of the remote control flashes white while the connection is estab-
lished.
The LED on the top of the remote control lights up white for several seconds when the
connection is established.
3
> Insert the batteries
(CR2450).
> Close the battery
compartment.
1
2
21
Publicidad
