Tabla de contenido
Publicidad
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.
INTRODUCTION
LED MOVING HEAD AZOR
BEAM
®
CLAB1
CONTROL FUNCTIONS
13-Channel and 16-channel DMX control
Master/Slave operation
Standalone functions
RDM-enabled
FEATURES
100 W LED. Super sharp 2° beam. Colour wheel with 14 brilliant colours and split colours. 17 fixed gobos. 2 rotating prisms (linear and
circular). Focus via DMX. Strobe. Pan and tilt motors with 16-bit resolution. Automatic position correction.
Temperature-controlled fan. 3- and 5-pin DMX connections. powerCON-compatible AC power connection. 2 x Omega mounting brackets
included.
Operating voltage 100–240 V AC. Power consumption 180W.
The spotlight features the RDM standard (remote device management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
Publicidad
Tabla de contenido
