Cameo AZOR B1 Manual De Usuario página 7

SETTING STANDALONE MODE
The stand alone mode allows the dimmer, strobe, colour wheel and gobo wheel etc. to be adjusted directly on the device with values
between 000 and 255, in a similar way to with a DMX controller. Four macros can be configured individually and stored internally, without
the need for an additional DMX controller is needed (User Macro 1 - User Macro 4). The macros are freely editable and can be selected as
required. Press MENU to access the selection menu. Using the UP and DOWN controls, select the menu item "Stand Alone" (observe arrow)
and confirm with ENTER. Using the UP and DOWN buttons, select the desired macro and press ENTER to confirm. Use UP and DOWN to
select the desired parameter, ENTER to enable editing, UP and DOWN to change the relevant value, and ENTER to confirm (see detailed table
below equivalent to 16-channel DMX mode channel 1 to 14).
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone

Slave
Settings
System Info
Function
Pan: 000
Pan Fine: 000
Tilt: 000
Tilt Fine: 000
Dimmer: 000
Dimmer Fine: 000
Strobe: 000
(multifunctional
006
strobe)
011
034
057
080
103
128
251
----------- Stand Alone -----------
User Macro 1

User Macro 2
User Macro 3
User Macro 4
User Macro 1-4
– 255 0% to 100%
– 255 0% to 100%
– 255 0% to 100%
– 255 0% to 100%
– 255 0% to 100%
– 255 0% to 100%
– 005 Strobe open
– 010 Strobe closed
– 033 Pulse random, slow -> fast
– 056 Ramp up random, slow -> fast
– 079 Ramp down random, slow -> fast
– 102 Random Strobe Effect, slow -> fast
– 127 Strobe Break Effect, 5s.....1s (Short burst with break)
– 250 Strobe slow -> fast <1Hz - 20Hz
– 255 Strobe open
----------- User Macro 1 -----------
Pan: 0-255

Pan Fine: 0-255
Tilt: 0-255
Tilt Fine: 0-255
Dimmer: 0-255
Dimmer Fine: 0-255
Strobe: 0-255
Colour: 0-255
Gobo: 0-255
Focus: 0-255
Prism: 0-255
Prism Rot: 0-255
P/T Macro: 0-255
P/T Speed: 0-255
Values & Description
0
–
Mode
255
User Macro 1
7