Husqvarna PG 510 Manual Del Usuario página 11

• Grinding head with half set on the 3 grinding discs.
To replace the diamond tools
WARNING:
WARNING:
diamond tools can become very hot.
1. Turn the ON/OFF switch to 0 and disconnect the
power plug to stop the product.
2. Push the emergency stop.
1146 - 003 - 21.03.2024
Disconnect the power plug.
Use protective gloves, as
3. Put the product into servicing position.
4. Put on protective gloves.
5. Push the center tabs together and rotate
counterclockwise (A) to unlock the tool plate from the
grinding disc (B).
A
6. Pull the tool plate straight out (C) to remove the tool
plate from the grinding disc.
7. Use a hammer to remove the diamond tools from the
tool plate.
B
C
11