Scroll Function; Residual Heat Indicator; Setting The Cooktop; Switching The Cooktop On And Off - NEFF T74F87N0 Instrucciones De Uso

Hotplate switched on
The displayed hotplate has been
switched on. The set power level lights
up in the display.
Other displays
The displayed hotplate cannot be
set.
The possible causes may be:
Only 2 hotplates may be used at
■
the same time on each side of the
hob.
The cookware is not suitable for
■
induction cooking.

Scroll function

With the scroll function, you can change different adjustment
values such as power levels, cooking duration and time, as well
as other values in the Options menu.
First select the value you wish to adjust. Then touch the display
area and slide your finger up or down or to the left or right.

Setting the cooktop

This section informs you how to set the cooking positions. The
settings table shows power levels and cooking times for
various meals.

Switching the cooktop on and off

Use the main switch to switch the cooktop on and off.
To switch on: touch the
main switch lights up. After a short activation time, the cooktop
is ready for operation.
To switch off: touch the
#
switches off. All cooking positions are switched off. Hibernate
mode is activated. See section Hibernate mode.
The heat indicator remains lit until the cooking positions have
cooled down sufficiently.
Note: The cooktop switches off automatically if all cooking
positions have been switched off for more than 60 seconds
and you do not make any settings on the touch display.

Hibernate mode

As soon as you switch off the hob, Hibernate mode is activated
for a set duration. The lamp above the main switch flashes.
Only after this duration has passed does the hob switch off
completely. During Hibernate mode, you can switch the
appliance on again using the main switch. The appliance is
immediately ready for use.
Note: To find out how to change the duration of the Hibernate
mode, see section Options menu.
22
symbol. The indicator above the
#
symbol. The indicator in the display

Residual heat indicator

The hob has a residual heat indicator h for each half of the hob,
which indicates any hotplates that are still hot. Do not touch the
hotplates or the halves of the hob with this display. Even if the
hob is already switched off, h will stay lit for as long as the
hotplates are still hot.

Setting a cooking position

Use the scroll function to set the desired power level.
Power level 1.0 = Lowest power
Power level 9.0 = Highest power
Each power level has an intermediate level. This is identified
with x.5.
Note: To find out how to deactivate the intermediate levels, see
section Options menu.
Setting the power level
The hob must be switched on.
Place cookware on the cooking surface.
1.
Touch the cookware symbol in the display. 0.0 lights up in the
2.
display.