Changing Settings; Display Calibration - NEFF T74F87N0 Instrucciones De Uso

Setting
Child lock
Power levels
Short-term memory
Hibernate mode
Power management
Language
Demo mode
Presetting
* Presetting

Changing settings

The hob must be switched on.
Touch the > symbol. The Options menu is displayed.
1.
Slide your finger up or down and select the desired option
2.
using the scroll function.
28
Description / Options
Using the child lock, you can lock the hob, thus preventing children from using it without permission.
Manual* - The child lock must always be switched on and off manually
■
Automatic - The child lock is always activated automatically when you switch the hob off
■
Off - The child lock is not available
■
You can choose 9 or 17 power levels. If there are 17 power levels, you can also select additional
intermediate settings for a more precise setting.
17 power levels*
■
9 power levels
■
You can set the duration of the short-term memory. As soon as you lift or move the cookware, all of
the settings for the hotplate are saved for this amount of time.
10-90 seconds (30 seconds*)
You can set the duration of the hibernate mode. After the specified period, the appliance will switch
off completely. While in hibernate mode, the appliance is ready to operate immediately.
0.5 h - 72 h (1.0 h*)
You can limit the total power of the hob and adjust it to match your local mains connection. To make
this adjustment, contact your fitter.
600-7200 Watts (7200 Watts*)
You can choose between 19 languages (English*).
You can use the appliance for demonstration purposes without the heating function. Set the demo
mode within three minutes of switching the appliance on.
Off*
■
On
■
You can reset all settings to the factory default setting.
(exception: Language, Clock, Display Calibration)
Set the desired value or option.
3.
Touch the Ñ symbol. The setting has been saved.
4.
Touch the Ñ symbol in the Options menu. All settings have
5.
been saved.

Display Calibration

With this function, you can adapt the precision of your finger
pressure for inputs on the display.
Note: The Touch display is precalibrated ex works. However,
recalibration may be necessary to improve the precision of the
inputs on the Touch display.
Touch the symbol. The Options menu is displayed.
>
1.
Select the option "Display Calibration" using the scroll
2.
function.
Follow the instructions on the display.
3.
The Touch display has been calibrated.